With Auto-MDI/MDI-X support, there is no need for crossover cables when you are connecting to another switch or to a computer. Additionally, it will automatically sense if the connected network devices are running at 10Mbps or 100Mbps and adjust accordingly. Equipped with a comprehensive LED indicators are supported for cable installation and normal operation diagnostics at a glance
- Eight RJ45 10/100BASE-T Ethernet Ports.
- Supports Auto-Negotiation for 10/100Mbps.
- Supports Auto-MDI/MDIX for each port.
- Supports Full/Half duplex transfer mode for 10/100Mbps.
- Complies with IEEE 802.3?IEEE 802.3u.
- Perform forwarding and filtering at non-blocking, full-wire speed.
- Built-in high-efficiency SRAM for packet buffer and 1K-entry look-up table.
- Supports IEEE 802.3x for full-duplex flow control and back pressure for Half-duplex flow control.
- Supports packet lengths up to 1536 bytes.
- Supports Store-and-Forward switching method.
- Supports Broadcast Storm Filtering Control.
- Half-duplex flow control.
- Standards and Protocol: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX CSMA/CD.
- Transfer Mode: Store and forward.
- Port: 5 Ports.
- Network Media:
- 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ù STP (maximum 100m).
- 100Base-TX: UTP category 5, 5E cable (maximum 100m) EIA/TIA-568 100Ù STP (maximum 100m).
- MAC Address: Automatically learning, automatically Update.
- Switching capacity: 1.6G.
- Frame filtering and forward rate: 10Mbps: 14880pps, 100Mbps: 148800pps.
- LED Indicator: LINK/ACT/10/100M/Power.
- Environment:
- Operating Temperature: 0 °C~40 °C (32 F~104 F).
- Storage Temperature: 40 °C~70 °C (-40 F~158 F).
- Operating Humidity: 10%~90% non-condensing.
- Storage Humidity: 5%~95% non-condensing.
- Input Consumption: 100-240V; 50/60Hz; 6V,1500mA.
1x Pluscom 5 Port 10/100 Ethernet Switch.
1x Power Adapter.
1x Quick Installation Guide.
Pcs/Carton: 50 pcs.
NW: 15Kg.
GW: 16 Kg.
Carton Size: 62x33.5x33.5 cm